Installation And Recycling Services

Installation Charges (Inc. VAT)

Freestanding wet appliances

£49

Freestanding wet appliances (Connection only)
(Washing machines, Washer dryers and Dishwashers.)

£39

Freestanding tumble dryers and wine coolers

£35

Freestanding fridges, freezers, fridge freezers
(Available on all refrigeration – exc. Americans.)

£35

American fridge freezers (Non-plumbed)

£69

American fridge freezers (Non-plumbed) (Connection only)

£59

American fridge freezers (Plumbed)
(Water supply must be within 3 metres and socket must be within 1 metre of where the appliance will be fitted.)

£69

American fridge freezers (Plumbed) (Connection only)
(Water supply must be within 3 metres and socket must be within 1 metre of where the appliance will be fitted.)

£59

Electric cookers

£119

Gas cookers

£139

Dual fuel cookers

£149

Electric range cookers

£149

Gas range cookers

£159

Dual fuel range cookers

£159

We currently do not offer installation of LPG appliances.

Integrated appliances
(Available on integrated and built-in appliances: Dishwashers, Washing machines, Washer dryers and Tumble dryers.)

£139

Built-in refrigeration

£139

Coffee machines

£135

Cooker hoods
(Available on recirculation hoods or hoods with existing ducting.)

£119

Electric ovens

£119

Electric hobs

£119

Gas ovens, Gas hobs

£149

Warming drawers

£105

We currently do not offer installation of LPG appliances.

Wall mount (Installation only)

£80

Wall mount (Installation and removal of existing)

£105

TV (Setup only)

£49

TV (Setup and removal of existing)

£65

Recycling Charges (Inc. VAT)

We can help you dispose of your old appliances in an environmentally friendly manner. We will take away your old appliance, like-for-like, when we deliver your new one*, and make sure it is recycled in accordance with the UK’s WEEE Directive (see below).
* Your old appliance must be disconnected and pulled out of situ before the delivery team arrive.		£19.99
We can unwrap your new appliance and remove all the packaging as required. All removed packaging materials will then be recycled. Just make sure you have selected ‘Unwrap & Recycle Packaging’ service in your basket.£9.99
WEEE Recycling
WEEE Recycling

The Waste Electrical and Electronic Equipment (WEEE) Directive is now UK law, aiming to make producers pay for the collection, treatment and recovery of waste electrical equipment. The regulations also mean that suppliers of equipment like high street shops and internet retailers must allow consumers to return their waste equipment for recycling.

Appliance Installation Guides

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • The existing housing can accommodate the selected appliance?
  • The appliance selected has the same hinging type as the one installed?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the hot zone is clear of any combustible materials, including sockets and switches?
  • That the appliance selected has the same hinging type as the one installed?
  • That there is gas supply to your kitchen and that you have Natural Gas or LPG supply?
  • Do you have a cooker switch in place (usually a big red switch)? This needs to be positioned outside of the hot zone.
  • Does the room of your choice have adequate ventilation coming into the kitchen (with outside fresh air) through a purposely built vent grille that is suitable for a gas appliance?
  • Do you have a 3-pin power plug (socket or a FUSED spur) within 1.5m of where you want the appliance to be installed, positioned outside the hot zone?
  • Is your existing appliance supplied by the same fuel?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the hot zone is clear of any combustible materials, including sockets and switches?
  • That the appliance selected has the same hinging type as the one installed?
  • That there is gas supply to your kitchen and that you have Natural Gas or LPG supply?
  • Do you have a cooker switch in place (usually a big red switch)? This needs to be positioned outside of the hot zone.
  • Does the room of your choice have adequate ventilation coming into the kitchen (with outside fresh air) through a purposely built vent grille that is suitable for a gas appliance?
  • Do you have a 3-pin power plug (socket or a FUSED spur) within 1.5m of where you want the appliance to be installed, positioned outside the hot zone?
  • Is your existing appliance supplied by the same fuel?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the hot zone is clear of any combustible materials, including sockets and switches?
  • That the appliance selected has the same hinging type as the one installed?
  • That there is gas supply to your kitchen and that you have Natural Gas or LPG supply?
  • Do you have a cooker switch in place (usually a big red switch)? This needs to be positioned outside of the hot zone.
  • Does the room of your choice have adequate ventilation coming into the kitchen (with outside fresh air) through a purposely built vent grille that is suitable for a gas appliance?
  • Do you have a 3-pin power plug (socket or a FUSED spur) within 1.5m of where you want the appliance to be installed, positioned outside the hot zone?
  • Is your existing appliance supplied by the same fuel?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the existing housing could accommodate the selected appliance?
  • Are services accessible (water feed connection, waste pipe connection, electricity connection)?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.

TV StandTV (Setup only)

What this includes:

  • Unpacking and assembly of your TV and removal of packaging.
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • A test demonstration to show that picture and sound are working fully.

TV (Setup and removal of existing)

What this includes:

  • Unpacking and assembly of your TV and removal of packaging.
  • Disconnection and removal of existing TV (stand only).
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • A test demonstration to show that picture and sound are working fully.
TV Wall MountWall mount (Installation only)

What this includes:

  • Unpacking and fitting your wall bracket and removal of packaging.
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • Running the cables neatly along the surface of your chosen installation wall using white trunking.
  • A test demonstration to show that picture and sound are working fully.

What you should know

  • We will only install a fixed bracket with a TV of up to 65″ to a plasterboard wall.
  • All TVs over 65″ can be installed on a solid wall (concrete, brick).
  • All multi-position brackets can only be installed to a solid wall/dot and dabbed wall.
TV Wall Mount - SideWall mount (Installation and removal of existing)

What this includes:

  • Disconnection of your old TV.
  • Unpacking and fitting your wall bracket and removal of packaging.
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • Running the cables neatly along the surface of your chosen installation wall using white trunking.
  • A test demonstration to show that picture and sound are working fully.

What you should know

  • We will only install a fixed bracket with a TV of up to 65″ to a plasterboard wall.
  • All multi-position brackets can only be installed to a solid wall/dot and dabbed wall.
Shopping Cart